EOS DIGITAL Software Instruction Manual

Saving Images
W-46
Allows you to specify the folder in which the image will be saved.
The image is saved as a new image in the same folder as the selected image.
When the [Save in following specified folder] radio button has been selected, this button allows
you to specify the folder in which the image will be saved. The name of the destination folder
is displayed next to the [Browse] button.
Select a setting for [Quality] (compression ratio) when you have selected
[RAW J JPEG] from the list box, from [4 (Highest image quality)] through
[1 (High Compression Ratio)]. Higher values give higher quality of the JPEG
image.
If some of the images to be saved are RAW images, select [Do not convert], [RAW J JPEG], or
[RAW J TIFF] for the conversion format. If you select [RAW J TIFF], you can select the number
of bits used when you save images from [8bit/ch], [16bit/ch] or [16bit/ch linear]. If you select
[RAW J JPEG], the images are saved in the [8bit/ch] format.
The extensions used for the saved files are shown below.
If you click this checkbox, the JPEG images that were
taken in the RAW+JPEG format are also to be saved.
Specify the resolution for saving
images in a range of 10 to 2000
pixels/inch.
Conversion Format Extension
Do not convert
EOS-1Ds Mark II, EOS-1D Mark II .CR2
EOS-1Ds, EOS-1D .TIF
JPEG (8bit/ch) .JPG
TIFF (8bit/ch) .TIF
TIFF (16bit/ch, 16bit/ch linear) .TIF