EOS Utility for Windows Instruction Manual (for EOS DIGITAL cameras released in 2006 or earlier)

3636
1
2
3
4
Introduction
Contents at
a Glance
Downloading
Images
Camera
Settings
Remote
Shooting
Reference
Preferences
Index
Enables automatic shooting when focus is
achieved at the fixed point of focus while the
shutter button is pressed fully
O This takes the picture automatically when the subject comes to the
preset focusing distance. Focusing detection is performed using the
selected AF point.
O Set the lens focus mode switch to < MF > and focus manually at the
desired point of focus.
O Keep pressing the shutter button fully.
O Using an accessory such as Remote Controller RS-80N3 which can
lock the shutter button relieves you from holding down the shutter
button while you wait for the subject.
O Because the camera remains on standby while the shutter button
is fully pressed, battery power is used up more quickly. For long
periods of photography, use the DC Coupler Kit provided with the
camera.
O When this function is used in combination with a flash, the flash
remains on standby at full charge. Consequently, the flash
batteries are used up more quickly. (The Speedlite’s SE mode is
disabled.)
O When you use a flash with this function, set the drive mode to
single shooting. If you select continuous shooting, the flash will be
unable to charge in time for successive shots and will not fire at
full charge.
O If you set the drive mode to continuous shooting, set the number
of shots in P.Fn-20. If you do not use P.Fn-20, once the camera
focuses on the subject, continuous shooting will continue until the
capacity of the memory card is reached.
O P.Fn-16 cannot be used with manual focus lenses or with lenses
that are too slow to be used with autofocusing.
O Do not use this function when C.Fn-4-1/3 is set as shots will be
taken regardless of whether the image is in focus.
Using an accessory such as Remote Controller RS-80N3 which can
lock the shutter button is recommended.
P.Fn-16
Disables automatic AF point selection
O When you select beyond the peripheral AF point, the selection stops
there. It makes selecting a peripheral AF point faster.
Enables automatic AF point selection when
C.Fn-11-2 has been set
O Enables the standard horizontal AF point selection together with
automatic AF point selection with C.Fn-11-2.
O Convenient when you want to use automatic AF point selection while
C.Fn-11-2 has been set.
Sets the continuous shooting speed
O From the list box, select the speed of continuous shots.
O By reducing the maximum continuous shooting speed, AI Servo AF
continuous shooting can be more stable.
O With the , only [Continuous Shooting] is displayed.
O If C.Fn-11-2 has been set, you can switch to automatic AF point
selection by pressing the < > button during autofocusing. For
more details, refer to “Selecting the AF Point” in the camera’s
Instruction Manual provided with the camera.
O If automatic AF point selection has been preset at [AF frame
registration] setting, the preset setting remains valid. For more
details, refer to “Registering and Switching the AF Point” in the
camera’s Instruction Manual provided with the camera.
If P.Fn-17 [Disables automatic AF point selection] has also been set,
P.Fn-17 will override P.Fn-18 to disable automatic AF point
selection.
In AI Servo AF, it may not be possible to complete the selected
speed of continuous shots.
P.Fn-17
P.Fn-18
P.Fn-19
1Ds Mk II
1Ds
COPY