User Guide
69
Manual selection limited to 11 AF points
(p.151)
¡Since the selectable AF points are
limited to 11, you can better
concentrate on framing the subject.
¡The AF point selection procedure is
the same as explained in steps 1 and
2.
Manual selection limited to 9 AF points
(p.151)
¡The center AF point and 8 peripheral
AF points are selectable.
¡Selecting a horizontal AF point is the
same as explained in steps 1 and 2.
Selecting an AF point beyond a
peripheral AF point will set the
automatic selection mode.
¡To select a peripheral AF point, press
the <
S
> button and turn the <
5
>
dial.
¡ To select a vertical AF point, you can also press the <S> button, then
hold down the <
P> button and turn the <6> dial.
¡ If two AF points (
hh) light up, both AF points will be used for autofocusing.
If you then select the left or right AF point, only that AF point will be
active.
C.Fn-13-1, 2
C.Fn-13-3
With C.Fn-13-1/2/3, all 45 AF points will be available for automatic selection.
F11]QCA.1,dk 47 ɚĘȸ ƒƐƐƓஉƑƑרƒƑýվෙýعؽƔݰƕƓಠ