EOS Utility Ver.3.0 for Macintosh Instruction Manual

Introduction

Contents

Downloading

Images

Camera

Settings

Remote

Shooting

Reference

Preferences

Index

The Wi-Fi/LAN connection pairing function of EU is used for LAN

connection.

Establish a connection following the procedures on Wireless File

Transmitter Instruction Manual, and Wi-Fi Function Instruction Manual

or Wired LAN Instruction Manual supplied with the camera. Note the

difference between connection procedures for EU version 2.14 or later

and those for EU version 2.13 or earlier as shown below.

 Starting up WFT pairing software

(EU version 2.13 or earlier)

Starting up WFT pairing software is required.

(EU version 2.14, version 3.x)

While starting up WFT pairing software is not necessary, starting up

EU is required.

 When a camera is detected

(EU version 2.13 or earlier)

When a camera is detected and a message is displayed, double-click

the WFT pairing software icon.

(EU version 2.14, version 3.x)

When a camera is detected and a message is displayed, click the

message.

LAN Connection with EU

Before starting the procedure to establish a LAN connection, make sure

to perform the following confirmation.

Start up EU before connecting the camera and the

computer.

 The following window appears.

Click the [Pairing over Wi-Fi/LAN] button. When a

message [To connect to the camera via LAN, some

Firewall settings must be changed. Do you want to

make these changes?] appears, select [Yes].

COPY