User Guide

66
E
Using the Full
Range of Features
Sound records/plays back normally.
When operating effects in TAPE CAMERA or CARD CAMERA mode, make
sure the program selector is set to
Q
.
1. Press the D.EFFECTS SELECT button to open the digital effects
menu.
D.EFFECT |, FADER, EFFECT and MULTI-S appear.
2. Select EFFECT.
The settings appear. Select the setting by turning the selector dial.
3. Select the desired setting.
You return to the digital effects menu.
4. Press the D.EFFECTS SELECT button to close the menu.
The menu disappears and the name of your selected setting flashes in the
display.
5. If you’re in TAPE PLAY (VCR) mode, press the e (play) button.
6. Press the D.EFFECTS ON/OFF button.
The name of your selection stops flashing and takes effect on the display.
Each time you press the D.EFFECTS ON/OFF button, the chosen effect is
activated or deactivated.
1. Press the D.EFFECTS SELECT button.
BLK&WHT flashes in the display.
2. Press the D.EFFECTS ON/OFF button.
The effect is activated and the image appears in black and white.
Effect on/off
Select effect
Operating effects
+
,
+
PLAY
(VCR)
TAPE
CAMERA
TAPE
+
CAMERA
CARD