DP-V1710, DP-V1711 Instruction Manual

OSD Menu
55
Sub Menu Setting Options (Bold: factory default)
LUT Name You can specify the name of LUT within one-byte 24 characters including alphabetical characters,
numbers, and symbols.
LUT Type User LUT
Gamma LUT
Gamut LUT
Select the LUT type.
Select LUT User LUT 1-8
Gamma LUT 1-8
Gamut LUT 1-8
Input Name Input the LUT name.
LUT Delete Deletes imported LUT.
LUT Type User LUT
Gamma LUT
Gamut LUT
Select the LUT type.
Select LUT User LUT 1-8
Gamma LUT 1-8
Gamut LUT 1-8
Delete Deletes LUT.
YCbCr Color Matrix Automatic
ITU-R BT.709
ITU-R BT.2020
Sets the matrix conversion method for input signals in YCbCr format.
[Automatic]: Matrix coefficient is set in conformance with the ITU-R
BT.2020 standard when the [Picture Mode] or [Color Gamut] setting is
[ITU-R BT.2020] and in conformance with the ITU-R BT.709 standard
otherwise.
[ITU-R BT.709]: Matrix coefficient is set in conformance with the ITU-R
BT.709 standard.
[ITU-R BT.2020]: Matrix coefficient is set in conformance with the ITU-R
BT.2020 standard.
2020 Constant
Luminance
11
Constant Luminance
Non-constant
Luminance
When [Picture Mode] or [Color Gamut] [ITU-R BT.2020]
Sets the color matrix conversion method.
[Constant Luminance]: YUV signals are linearly converted and then
converted into RGB signals.
[Non-constant Luminance]: YUV signals are converted into RGB signals
without changing gamma 0.45.
2020 Gamut Mapping Gamut Mapping
Clipping
When [Picture Mode] or [Color Gamut] [ITU-R BT.2020]
[Gamut Mapping]: Mapping is performed on colors outside the native
color gamut by Canon's unique method.
[Clipping]: Colors outside the native color gamut are clipped by a general
method.