DP-V1710, DP-V1711 Instruction Manual

OSD Menu
54
Sub Menu Setting Options (Bold: factory default)
When [Type] [User LUT]
User LUT User LUT 1 to User
LUT 8
When [Picture Mode]
[User 1-7]
ARRI (Rec2100-PQ-
1K-100)
ARRI (Rec2100-HLG-
1K-200)
VARICAM (V-Log to
V-709)
2020 PQ to 2020 SDR
2020 PQ to 709 SDR
2020 HLG to 709 HLG
Sets external LUT, LUT presets for ARRI or Panasonic cinema cameras or
LUT presets for HDR/SDR conversion.
CDL/User LUT Bypass On, Off When set to [On], you can return to the image quality before user LUT was
applied.
Detail Settings
Sets details for Picture Mode.
Boost Contrast
10
On
Off
You can increase the brightness (When AC power is used).
The upper limit for [Contrast] and the [Backlight Control] settings vary
depending on the [Boost Contrast] settings.
[On]: The settings for [Contrast] are from 0 to 6,000.
When [Backlight Control] is [Local Dimming High/Low] and [Boost
Contrast] is set to [On], it turns to [Global Dimming].
[Off]: The settings for [Contrast] are from 0 to 3000.
LUT Import You can import LUT. File names that can be imported can be up to 48 one-byte characters, including
alphabetical characters, numbers, and symbols (including file extensions).
Filename Select a filename.
LUT Type User LUT
Gamma LUT
Gamut LUT
Select the LUT type.
Select LUT User LUT 1-8
Gamma LUT 1-8
Gamut LUT 1-8
Base Color Gamut SMPTE-C
EBU
ITU-R BT.709
Adobe RGB
DCI-P3
Native
When [LUT Type] [Gamut LUT]
Selects the color gamut used when creating the LUT.
Execute Performs import.