Digital Photo Professional Instruction Manual Macintosh (EOS DIGITAL REBEL XTi/EOS 400D DIGITAL)

71
1
2
3
4
5
Introduction
Contents at
a Glance
Basic
Operation
Advanced
Operation
Advanced
Image Editing
and Printing
Editing JPEG
Images
Index
Processing
Large Numbers
of Images
Reference
* Operates when you have selected multiple images and the
trimming window is displayed.
Full screen display/returns to normal
screen
List of Trimming Functions
Switches between displayed
images.*
Level of opacity outside a trimming
range
Displays borders around a trimmed
range.
Copies the trimmed range and
applies (pastes)* it to a separate
image.
Size of trimmed range (you can also
enter numerical values)
Upper left coordinates of trimmed
range (you can also enter numerical
values)
Ratio of trimming range (you can also
enter numerical values if you have
selected [Custom])
O If [Free] has been selected in the [Aspect ratio] list box, you can
also drag the borders of the trimmed range to change its range.
O To apply the same trimming range to multiple images, use the
[Copy], [Paste] and [Apply All] buttons.
O The image does not become a trimmed image by performing
“Adding a Recipe and Save” (p.76). You must save the image as
a separate image (p.29).
O If you print a trimmed image without converting and saving with
Easy-PhotoPrint (p.30), the untrimmed image is printed. Convert
the image to a separate image and save before printing (p.29).
O Changes are not saved to a trimmed image, merely information
about the trimmed range is saved in the image. For that reason,
you can return an image to its original condition at any time
(p.75).
O Check trimmed images in the trimming window. You cannot check
them in other windows.
O Each operation can also be performed with the menu which
appears by clicking on the image while holding down the
<control> key.
O To switch between full screen display/normal screen display,
press the < > + <F11> keys.
O You can also press the <esc> key to return the full screen display
to the normal screen display.
O If you have clicked [Apply All], the trimming range you have
copied is applied to all images selected when the trimming
window is displayed.