User Guide

106
Cannot transfer!
When transferring images to your computer using the Direct
Transfer menu, you attempted to select an image with corrupted
data or an image taken with a different camera or data type. You
may have also attempted to select a movie when [Wallpaper]
was selected in the Direct Transfer menu.
Protected!
You attempted to erase or edit a protected image, movie or
sound memo.
Too many marks.
Too many images have been marked with print settings, transfer
settings or slide show settings. Cannot process any more.
Cannot complete!
Could not save the print, transfer or slide show settings.
Unselectable image.
You attempted to set the print settings for a non-JPEG image.
Communication error
The computer was unable to download the image due to the
large amount of images (approx. 1000) stored on the memory
card.
Lens error, restart camera
Camera detected an error while moving the lens and cut the
power automatically. This error message may appear if you
press on the lens while it is moving or power up the camera in a
dusty or sandy environment. Power up the camera again and
shoot or playback images. Take the camera to a service center if
this message appears frequently because there may be a
problem with the lens.
Exx
(xx: number) Camera detected an error. Turn the power off and
then back on, then shoot or play back. A problem exists if the
error code reappears. Note the number and contact your Canon
Customer Support Help Desk. If an error code displays directly
after taking a picture, the shot may not have been recorded.
Check image in playback mode.