User's Manual

1
2
3
4
5
6
7
8
9
10
11
Cover
Preliminary Notes
and Legal Information
Contents: Basic
Operations
Advanced Guide
Camera Basics
Using GPS
Function
Auto Mode/
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
95
• If image stabilization cannot prevent camera shake, mount the
camera on a tripod or take other measures to hold it still. In this
case, set [IS Mode] to [Off].
Movies
Shooting Movies With Subjects at the Same Size Shown
Before Shooting
During movie recording, a smaller image display area is shown, with the
subject enlarged, as a measure when correcting other distortion such as
rotational camera shake. To shoot subjects at the same size shown before
shooting, you can disable this image stabilization.
Follow the steps in “Changing the IS
Mode Settings” (=
95) to access the
[IS Settings] screen.
Choose [Dynamic IS], and then choose
[2] (=
52).
• You can also set [IS Mode] to [Off], so that subjects are recorded at
the same size shown before shooting.
Other Settings
Still Images
Changing the Compression Ratio
(Image Quality)
Choose from two compression ratios, as follows: [ ] (Super Fine), [ ]
(Fine).Forguidelinesonhowmanyshotsateachcompressionratiocant
on a memory card, see “Number of 4:3 Shots per Memory Card” (=
191).
Congurethesetting.
Press the <m> button, choose [ ] in
the menu, and choose the desired option
(=
34).
Still Images Movies
Changing the IS Mode Settings
1 Access the setting screen.
Press the <n> button, choose [IS
Settings] on the [4] tab, and then press
the <m> button (=
35).
2 Congurethesetting.
Choose [IS Mode], and then choose the
desired option (=
36).
Continuous
Optimal image stabilization for the shooting conditions is automatically
applied (Intelligent IS) (=
52).
Shoot Only* Image stabilization is active only at the moment of shooting.
Off Deactivates image stabilization.
* The setting is changed to [Continuous] for movie recording.