User's Manual

f: Selecting the AF ModeN

Suited for still subjects. When you

press the shutter button halfway, the

camera will focus only once.

When focus is achieved, the AF point

which achieved focus will flash in red,

and the focus confirmation light <o>

in the viewfinder will also light.

With evaluative metering, the

exposure setting will be set at the

same time focus is achieved.

While you hold down the shutter button

halfway, the focus will be locked. You

can then recompose the shot if desired.

In the d

F shooting modes, AF is also possible by

pressing the <p> button.

This AF mode is for moving subjects when

the focusing distance keeps changing. While

you hold down the shutter button halfway,

the subject will be focused continuously.

The exposure is set at the moment

the picture is taken.

In the d

F shooting

modes, AF is also possible by

pressing the <p> button.

One-Shot AF for Still Subjects

Focus confirmation

light

AF point

AI Servo AF for Moving Subjects

If focus cannot be achieved, the focus confirmation light <o> in the

viewfinder will blink. If this occurs, a picture cannot be taken even if the

shutter button is pressed completely. Recompose the picture and try to

focus again. Or see “When Autofocus Fails” (p.84).

If the [1 Beep] menu is set to [Off], the beeper will not sound when

focus is achieved.

COPY