User Manual- for Camera

175
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, C1, and C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
3
Choose shooting mode [ ], [ ],
[ ], or [ ].
z Flash settings can only be congured in
these modes. In other modes, the ash
is adjusted and red automatically, as
needed.
4
Congure the external ash.
z Press the [ ] button, choose [Flash
Control] on the [ 5] tab, and then press
the [ ] button.
z Options already set on the ash itself are
displayed.
z Press the [
][ ] buttons or turn the [ ]
dial to choose an item, and then set the
desired option.
z Available items vary depending on the
shooting mode and the ash attached
(
=
176).
● Settings for the built-in ash cannot be congured while a
Speedlite EX series ash is attached, because that setting screen
is no longer accessible.
● You can also access the setting screen by pressing the [
] button
for at least one second.
● 600EX-RT/580EX II only: [Flash Control] is not available if the
external ash has been set up for stroboscopic ash.
● 320EX only: Auto LED lighting is only available in low-light movie
recording or in Movie mode. In this case, the [
] icon is shown.
Using an External Flash (Sold Separately)
Still Images Movies
More sophisticated ash photography is possible with an optional
Speedlite EX series ash. For movie shooting using an LED light, the
optional Speedlite 320EX ash is available.
● This camera does not support some Speedlite EX series
functions.
● Non-EX series Canon ash units may not re correctly or may not
re at all, in some cases.
● Use of non-Canon ash units (especially high-voltage ash units)
or ash accessories may prevent normal camera operation and
may damage the camera.
● Also refer to the Speedlite EX series manual for additional
information.
Speedlite EX Series
Still Images Movies
These optional ash units can provide bright lighting and meet a variety of
ash photography needs.
1
Attach the ash.
z Make sure the camera is off, and then
attach the ash unit to the hot shoe.
2
Turn the ash on, and then turn the
camera on.
z A red [ ] icon is now displayed.
z The ash pilot lamp will light up when the
ash is ready.