User Manual- for Camera
174
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, C1, and C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
● Although the viewnder is produced under extremely high-
precision manufacturing conditions and more than 99.99% of the
pixels meet design specications, in rare cases some pixels may
be defective or may appear as red or black dots. This does not
indicate camera damage or affect recorded images.
● Some aspect ratio settings (
=
52) will cause black bars to be
displayed on the top and bottom or left and right edges of the
screen. These areas will not be recorded.
● You can switch between viewnder and screen display by
pressing the viewnder’s [
] button.
● If you have selected MENU (
=
31) ► [ 1] tab ► [Display
Control] ► [Manual], the screen will not be activated when you
move your eye away from the viewnder. To activate the screen,
press the viewnder’s [
] button.
● Motion is displayed more smoothly (whether on the viewnder
or on the screen) in [
], [ ], [ ], [ ], or [ ] mode
when a viewnder is used. If you prefer normal display and longer
battery life, choose MENU (
=
31) ► [ 1] tab ► [Display
Mode] ► [Power Saving].
● Display will switch to the camera screen during Wi-Fi
communication (
=
133) or when the on-screen keyboard
(
=
32) or Story Highlights home screen (
=
130) is displayed.
● You can congure display brightness (
=
162) for the viewnder
and camera screen separately.
4
Turn the camera on and switch
between using the screen and
viewnder as needed.
z Moving the viewnder near your eye will
activate its display and deactivate the
camera screen.
z Moving the viewnder away from your
eye will deactivate its display and activate
the camera screen.
5
Adjust the diopter.
z Turn the dial to bring viewnder images
into sharp focus.
6
When nished, remove the
electronic viewnder.
z To remove the viewnder from the
camera, turn the camera off and hold
down the viewnder’s [UNLOCK] button
as you remove it.
z Remove and store the viewnder when
you are not using it.
● The viewnder display and camera screen cannot be activated at
the same time.
● Touch operations on the camera screen are not possible while the
viewnder display is in use.