Specifications

PLEASE NOTE

1. Please contact a Canon representative or distributor to have the instruments installed.

2. Computer, monitor, or other equipment used in the CR-1 fundus imaging system must be conforming to the

IEC60601-1/UL60601-1 or IEC60950/UL60950.

Furthermore all configurations shall comply with the system standard IEC 60601-1-1. If in doubt, consult

the technical services department or your local representative.

Be sure to also use an isolation transformer conforming to IEC60601-1/UL60601-1 when a computer or

monitor conforming to IEC60950/UL60950 is used.

3. To maintain compliance to IEC60601-1-2, it is recommended that the computer, monitor, or other equipment

configured with the CR-1 be evaluated to IEC60601-1-2 or FCC Part.15 Subpart B Class B and CISPR 24.

4. The user is responsible for the use and maintenance of the product.

We suggest that a member of the user’s staff be designated as being in charge of maintenance so as to

ensure that the product is kept in a safe and good condition.

Also, medical products must be used only by a qualified person.

5. This product may malfunction due to electromagnetic waves caused by cellular phones, transceivers, radio-

controlled toys, etc. Be sure to avoid having objects such as these, which affect this product, brought near

the product.

6. In no event will Canon be liable for direct or indirect consequential damage arising out of the use of this

product. Canon will not be liable for loss of image data due to any reason.

7. Reading of image and storage of data must be performed in accordance with the law of the country where

the product is being used. Also, the user is responsible for maintaining the privacy of image data.

8. The power cable supplied is designed to be used solely with this camera. Do not use it for any other

products.

9. Canon reserves the right to change the specifications, configuration and appearance of the product without

prior notice.

Under copyright laws, this manual may not be copied, in whole or in part, without the written consent

of Canon.

European Union (and EEA*) only.

This symbol indicates that this product is not to be disposed of with your household

waste, according to the WEEE Directive (2002/96/EC) and your national law. This

product should be handed over to a designated collection point, e.g., on an

authorized one-for-one basis when you buy a new similar product or to an

authorized collection site for recycling waste electrical and electronic equipment

(EEE). Improper handling of this type of waste could have a possible negative

impact on the environment and human health due to potentially hazardous

substances that are generally associated with EEE. At the same time, your

cooperation in the correct disposal of this product will contribute to the effective

usage of natural resources. For more information about where you can drop off

your waste equipment for recycling, please contact your local city office, waste

authority, approved WEEE scheme or your household waste disposal service.

For more information regarding return and recycling of WEEE products, please

visit www.canon-europe.com

* EEA : Norway, Iceland and Liechtenstein