CP-200-300_Software_Win

34
1
Connect one end of the USB cable to the USB port on the printer,
and the other end to a USB port on your computer.
There is no need to turn off the printer or your computer.
When connecting the printer to your computer, make sure the connectors on
the ends of the USB cable match the terminals on the printer and your
computer.
For the location and direction of your computers USB port, refer to the
documentation provided with your computer.
2
The rst time the printer is connected to your computer, the Add
New Hardware Wizard dialog (Windows 98 (p.12) / Me (p.17)) or
Found New Hardware Wizard dialog (Windows 2000 (p.21) / XP
(p.25)) appears and installation starts.
When disconnecting the USB cable, you do not need to turn off the
printer or your computer.
USB port
on computer
USB cable