Getting Started Guide

71 Installing ColorPASS software and fonts
TO CONFIGURE A CONNECTION FOR COLORWISE PRO TOOLS:
1. Launch the utility by double-clicking its icon.
The Choose Printer Device dialog box appears.
2. If you have previously configured a connection to the ColorPASS, then you are ready to
use ColorWise Pro Tools. If you have not configured a connection, click Add.
3. Enter the appropriate information for the ColorPASS.
Nickname
—Enter a name for the ColorPASS. This can be any name you wish; it does
not have to match the actual server name of the ColorPASS.
NOTE: The nickname cannot contain any of the following seven characters:
[ ] _ " ' <space> <tab>
Protocol—Choose the type of network protocol you are using from the pop-up menu.
ColorWise Pro Tools is supported only with TCP/IP, so no selection is necessary.