Getting Started Guide

2 Set Up the Machine

Optional Paper Drawer

When the Optional Paper Drawer is installed in the

machine, the procedure for setting up the Optional

Paper Drawer displays on the “Setup Guide.”

1 Pull out the optional paper drawer until it stops.

2 Hold the optional paper drawer with both

hands and remove it from the machine.

Make sure to take the optional paper drawer out of the

machine before loading paper. If paper is loaded while the

optional paper drawer is partially pulled out, the optional

paper drawer may fall, resulting in damage to the machine

or personal injury.

3 Press [OK] to proceed to the “Setup Guide.”

4 Hold the lock release lever of the side paper

guides (A) and slide the guides to the mark for

the size of the paper to be loaded. The side

paper guides move together.

Make sure to set the guides to the mark for the size of the

paper to be loaded correctly. If the guides are positioned

incorrectly, it may cause paper jams, dirty prints, etc.

5 Press [OK] to proceed to the “Setup Guide.”

6 Hold the lock release lever of the rear paper

guides (A) and slide the guides to the mark for

the size of the paper to be loaded.

Make sure to set the guides to the mark for the size of the

paper to be loaded correctly. If the guides are positioned

incorrectly, it may cause paper jams, dirty prints, etc.