Getting Started Guide

10
2 Set Up the Machine
Start “Setup Guide”
The “Setup Guide” assists you in setting up the machine before using it.
When you turn on the machine for rst time, the “Setup Guide” automatically starts on the display.
Once the “Setup Guide” starts, it cannot be stopped.
If you turn o the machine while using the “Setup Guide,” turn on the machine and start the “Setup Guide” again.
Once you complete the “Setup Guide,” it does not start automatically when you turn on the machine.
You can restart the “Setup Guide” afterward from the user mode. (See “Change the Settings,” on p. 36.)
Information About the Keys
Press the Left/Right Any key to select the alternative key at the bottom of the display.
Press [
▼
] [
▲
] [
◀
] [
▶
] to move the cursor position.
Use (Scroll Wheel) to move the cursor position.
Press [OK] to set the entry or to proceed to the next screen.
Press [Back] to return to the previous screen.
–
–
–
–
–
●
‒
‒
‒
‒
‒
1 Make sure the following screen is displayed on
the display, then press [OK] to proceed to the
“Setup Guide.”
2 Make sure the following screen is displayed on
the display, then press [OK] to proceed to the
“Setup Guide.”
The screen explains how to operate the “Setup Guide”
using the keys on the operation panel.
For details on the key operation, see “Information About
the Keys,” above.
3 Make sure the following screen is displayed on
the display, then press [OK] to proceed to the
“Setup Guide.”