User Guide

CHAPTER 13 TROUBLESHOOTING
13-280
COPYRIGHT © 1999 CANON INC. CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
PRJ>ADJUST
Level 3
NEGA-B
NEGA-G
NEGA-R
POSI-B
POSI-G
POSI-R
N-LMT
N-G-LMT
P-LMT
P-G-LMT
OHP-LMT
P-DA-XS
P-DA-XE
P-DA-YS
P-DA-YE
N-DA-XS
N-DA-XE
N-DA-YS
N-DA-YE
O-DA-XS
O-DA-XE
O-DA-YS
ODAS-YE
CHNGR-X
CHNGR-Y
Remarks
0 to 255
-99 to +99
Unit: 0.6 mm (approx.)
Standard:
XS=24
XE=8
YS=32
YE=24
-99 to +99
Unit: 0.6 mm (approx.)
Standard: 50
-99 to +99
Unit: 0.6 mm (approx.)
Standard:
XS=24
XE=8
YS=32
YE=24
-99 to +99
Unit: 0.6 mm (approx.)
Standard: 0
Description
Use it to adjust the target value for shading
correction when copying negative film with the
projector in use.
Use it to adjust the target value for shading
correction when copying positive film with the
projector in use.
Use it to change the limit for the projector lamp in
negative normal mode with the projector in use
Use it to change the limit for the projector lamp in
negative copyboard mode with the projector in use.
Use it to change the limit for the projector in positive
normal mode with the projector in use.
Use it to change the limit for the projector in positive
copyboard mode with the projector in use.
Use it to change the limit for the projector in
transparency mode with the projector in use.
Use it to adjust the degree of the positive film
original frame erasing mechanism with the projector
in use.
Use it to adjust the degree of negative film original
frame erasing mechanism with the projector in use.
Use it to adjust the degree of transparency film
original erasing mechanism with the projector in
use.
Use it to adjust the position in main scanning
direction with the projector rotary changer in use.
Use it to adjust the position in sub scanning direction
with the projector rotary changer in use.
-100 to +100
A higher value darkens the
color.
B → Y
G → M
R → C