User Guide

1999 CANON INC. CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

13-17

CHAPTER 13 TROUBLESHOOTING

5) Secure the drum shaft positioning tool [7]

in place to the photosensitive drum frame

unit with the two screws [8] removed in

step 2).

6) Secure the drum motor assembly in place

with seven screws.

7) Detach the drum shaft positioning tool,

and slide out the photosensitive drum unit

from the copier; then, mount the unit and

parts removed in step 1).

3 Use of Grease

Do NOT use grease (conducting or

otherwise) to the slip ring for the drum heater.

Developer

Yellow

Cyan

Magenta

Black

S-B gap

0.62 mm

0.74 mm

0.48 mm

Table 13-201

[7]

[8]

Figure 13-220

Adjusting the Developing

Assembly S-B Gap

If you have replaced the developing blade,

adjust the S-B gap of each sleeve using the S-

B gap gauge (FY9-3044-000).