User Guide

COPYRIGHT © 1999 CANON INC. CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
8-15
CHAPTER 8 FIXING SYSTEM
3. Removing the Fixing Upper Heater
1) Open the front cover.
2) Remove the fixing cover.
3) Slide out the transfer drum frame.
4) Pull out the faston [1] at the rear of the
fixing upper heater.
Figure 8-404
5) Pull out the faston [2] at the front of the
fixing upper heater, and remove the screw
[3]; then, remove the metal fixing [4].
6) Slide out the fixing upper heater to the
front.
Figure 8-405
4. Removing the Fixing Upper Roller
1) Open the front cover.
2) Remove the fixing cover.
3) Slide out the transfer drum frame.
4) Remove the fixing assembly.
5) Remove the fixing upper heater.
6) Open the fixing upper roller unit, and
remove the screw [1]; then, detach the
harness guide [2].
Figure 8-406 (rear)
7) Remove the two screws [3], and shift the
heater support plate (rear) [4]; then,
remove the fixing upper roller metal
fixing [5] (one each at front and rear).
Figure 8-407 (front)
[1]
[2]
[4]
[3]
[4]
[3]
[1]
[2]
[5]
[5]