User Manual

E154
4. Operation in Full Mode
Serial Communication with Camera ON/OFF
Two types of camera–lens interfaces are available: analog control or control via serial communication. This setting
enables you to switch between auto control detection and analog control.
By default, this setting is ON, enabling auto detection of whether serial or analog control is used.
To restrict the interface to analog control, set it to OFF.
Info
CamSeri:
Encoder:
OFF
I/Fprior
I/Fprior
Mount
Mount
ON
[ I-Gain ]
[Adj]
[ ]
MENU
1
A
Fr1P
[ Basic ]
[Trk]
OFF
[I-Tq]H
Info
Encoder:
OFF
S/N
Info
CamSeri:
Encoder:
OFF
OFF
OFF
3D:
Press once and twice.
The display switches to the Info screen.
Press four times.
[CamSeri] is underlined.
Press or .
Press left or right to switch the function {ON} or {OFF}.
Initial Top Screen
Info Screen
Options
(D)
ON OFF
Description
Serial communication with the camera
Enabled
Serial communication with the camera
Disabled
(D): Default value
MENU
× 2
Info
× 4 or
1
2
3