CanoScan N670U/N676U/N1240U ScanGear CS-U 6.2 for Win/Mac Guide

56
chapter 4
Scanning an
Original
Troubleshooting
Glossary
Contents
Index
Previewing and Scanning an
Original
You can preview and scan an image in either the Simple Mode or the
Advanced Mode. This section describes both procedures.
Scanning in the Simple Mode
This is a brief overview of the general procedure for previewing and
scanning an original in the Simple Mode.
1.
Place the original on the scanner.
Note
For details about positioning the original on the scanner,
see your scanner user's manual.
2.
Start the software application you are going to use. (for example
ArcSoft PhotoStudio)
With Windows, if other TWAIN driver is installed on your computer,
you must choose this scanner. Click the [File] menu and select [Select
Source], and select [CanoScan N670U / N676U] or [CanoScan
N1240U] on the dialog box.