User Guide

59
chapter 5
Scanning an
Original
Top Page
Glossary
Contents
Index
Previewing and Scanning an
Original
You can preview and scan an image in either the Simple Mode or the
Advanced Mode. This section describes both procedures.
Scanning in the Simple Mode
This is a brief overview of the general procedure for previewing and
scanning an original in the Simple Mode.
1.
Place the original on the scanner.
Note
For details about positioning the original on the
scanner, see your scanner user's manual.
2.
Start the software application you are going to use. (for example
PhotoStudio 2000)
3.
Pull down the File menu and select the Select Source command or
its equivalent.
In the Select Source dialog box select the name of the scanner
(CanoScan N650U/N656U or CanoScan N1220U) from the list and
click the OK button.