CanoScan D1230U/D2400U Toolbox2.6 for Win Guide

21
Operating Instructions for Each Function
The operation of each function on the
toolbar is explained. Examples of the
Easy Scan in the On and Off state are
both provided.
Fax
This function sends scanned images as fax attachments.
• To use this function, a fax driver and fax modem available on the market is required.
Since the default setting for this function at installation is your default printer driver, you
must link the fax driver to this function using ScanGear Toolbox’s link button. (p. 29)
• This function cannot be used to scan films.
Easy Scan Off
1.
Click the (Fax) icon.
2.
The Scan Settings dialog will display (p. 12).
• Check the settings, make any required changes and click the [OK] button.
3.
The fax driver dialog will display. Check the settings and click the [OK]
button.
4.
The scan will start and send the image data to the fax driver. The fax
will start transmission.
Easy Scan: off Easy Scan: on