The socket-outlet shall be installed near the equipment and shall be easily accessible. LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. ® As an ENERGY STAR Partner, Canon Inc. has determined that this product ® meets the ENERGY STAR guidelines for energy efficiency. Quick Start Guide Please read this guide before operating this scanner. After you finish reading this guide, store it in a safe place for future reference.
Safety Precautions FCC Notice (U.S.A. Only) For 120V, 60Hz model Model Number : K10319 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Package Contents Package Contents Scanner and Accessories Scanner USB Cable Power Cord Film Guide (for 35mm film strip/slide) Documentation • Quick Start Guide (this document) • Additional Documents Setup CD-ROM • Software Programs - ScanGear (scanner driver) MP Navigator EX (utility software) Solution Menu (menu panel software) ArcSoft PhotoStudio (image editing software) • On-screen Manuals - Scanning Guide (on-screen manual) (for ScanGear, MP Navigator EX, and troubleshooting) - Manuals for b
Installing the Software Installing the Software • Do NOT connect the scanner to a computer before installing the software. If you connect the scanner and the Found New Hardware screen appears, unplug the USB cable from the computer and click [Cancel]. The screen may close automatically when the USB cable is unplugged. • Quit all running applications before installation. • To upgrade from Windows XP to Windows Vista, first uninstall software bundled with the Canon scanner.
Installing the Software 5 Click [Install] to start installation. Carefully read the License Agreement, and then click [Yes] to proceed. 6 Follow the on-screen instructions to perform the installation. 7 When the User Registration screen appears, follow the on-screen instructions to ensure product support. For Macintosh, skip step 8 and go to step 9. 8 For Windows, when the Extended Survey Program screen appears, confirm it. If you can agree, click [Agree].
Preparing the Scanner Preparing the Scanner Unlocking the Scanner 1 2 Peel the shipping tapes off the scanner. Open the document cover and slide the lock switch toward the unlock mark ( ). Unlock Mark • Handle the scanner with both hands. Be careful not to drop the scanner. • When you carry or transport the scanner, make sure to slide the lock switch toward the lock mark ( ) to fasten the scanning unit. Connecting the Scanner 1 2 3 4 Connect the scanner to your computer with the supplied USB cable.
Try Scanning Try Scanning This section explains the basic scanning procedures using MP Navigator EX. 1 Place a color photo document with the side to be scanned facing down on the document glass at least 0.4 in. (1 cm) away from the edges of the document glass, and then close the document cover. Top Bottom 2 Start MP Navigator EX. For Windows: Double-click the [Canon Solution Menu] icon, then click [Scan/import photos or documents.].
Using the Scanner Buttons Using the Scanner Buttons Scanner buttons allow you to copy, scan, e-mail, and save scanned images in PDF format with a press of a button. Simply place your document on the scanner, and then press the scanner button for the required function. For more information, see the Scanning Guide (on-screen manual). PDF Buttons PDF buttons allow you to easily create PDF files according to your needs. Note that these buttons are not labeled on the scanner.
Scanning with MP Navigator EX Scanning with MP Navigator EX MP Navigator EX enables you to perform various tasks, such as compositing images, scanning with the scanner driver (ScanGear), and correcting/editing scanned images, as well as simply scanning. Starting MP Navigator EX 1 Click [Scan/import photos or documents.] in the Solution Menu. You can also start it by following procedure. For Windows: Select [Start] – [(All) Programs] – [Canon Utilities] – [MP Navigator EX 2.
Scanning Film Scanning Film This scanner can scan 35 mm film (film strip or slide). Follow the procedure below when scanning film. 1 Remove the protective sheet from the document cover. Press and hold the levers at the top of the protective sheet c while you pull the sheet outward and detach it d. • Store the protective sheet in a safe place so that it will not get bent or broken. • Always put the protective sheet back when you are not scanning film to protect the light source in the document cover.
Scanning Film 35 mm Slides c d Push the Film Holder on the Film Guide inward to open it in order (1) and (2) as shown in the figure on the right. With the Film Holder being opened and lifted, remove the film strip frame. (1) (2) Align the Film Guide’s tab with the FILM symbol on the document glass of the scanner. Calibration Slot e Place a slide or slides face down (correctly viewed from below) in the Film Guide as shown in the figure on the right.
Scanning Film 5 Click [Film]. 6 Click [Scan]. Do not move the scanner while it is operating. 7 When the preview is displayed, place a check mark beside the number(s) of the frame(s) you want to scan, and then click [Scan] to start scanning. Do not move the scanner while it is operating. 8 When prompted that the scanning completed, click [Exit]. 9 Click [Save] to save the images and close MP Navigator EX.
Specifications Specifications CanoScan 5600F Scanner Type Flatbed Sensor Type CCD 6-line color Light Source White LED/Cold cathode fluorescent lamp Optical Resolution *1 4800 x 9600 dpi Selectable Resolution 25-19200 dpi (ScanGear) Color Scanning Bit Depth 48 bit input (16 bit input for each color (RGB)) 48 bit or 24 bit output (16 bit or 8 bit output for each color (RGB)) 48 bit input (16 bit for each color) Grayscale Scanning Speed *3 (Photo or Document) Scanning Speed *3 Color Grayscale,
Safety Precautions Safety Precautions Please read and take note of the following precautions before using the scanner and accessories. WARNING Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. In order to use the scanner safely, always pay attention to these warnings. CAUTION Indicates a caution concerning operations that may lead to injury to persons or damage to property if not performed correctly.
Safety Precautions FCC Notice (U.S.A. Only) For 120V, 60Hz model Model Number : K10319 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
The socket-outlet shall be installed near the equipment and shall be easily accessible. LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. ® As an ENERGY STAR Partner, Canon Inc. has determined that this product ® meets the ENERGY STAR guidelines for energy efficiency. Quick Start Guide Please read this guide before operating this scanner. After you finish reading this guide, store it in a safe place for future reference.
