HD Camcorder Manual

90  Video
IMPORTANT
• To protect the lens, keep the lens cover closed when you are not
recording movies and when you are not using the camcorder.
• Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss or damage
to the memory.
- Do not open the memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder’s operating mode.
• Be sure to save your recordings regularly (A 128), especially after
making important recordings. Canon shall not be liable for any loss or
corruption of data.
• Recordings on an Eye-Fi card will be uploaded automatically after set-
ting the camcorder to playback mode, if you are within the range of a
configured network. Always verify that Eye-Fi cards have been
approved in the country/region of use. See also Using an Eye-Fi card
(A 146).
NOTES
• The zoom, Quick Start function, power saving modes, etc. operate the
same way in mode as in mode. For details, refer to AUTO
Mode (A 44).
• Photos cannot be recorded while the digital zoom is activated (light blue
area on the zoom bar) or while fading in or fading out a scene.
Reviewing the Latest Scene Recorded
You can review the last 4 seconds of the last scene recorded with the
camcorder without switching to playback mode. While reviewing the
latest scene, the picture will be played back without sound.
Operating modes:
[FUNC.] > [v Review Recording]
COPY