PowerShot S100 Manual

Adding Effects and Shooting (Creative Filters)
69
Specify the color.
z Position the center frame so it is filled with
the color you want and press the q button.
X The specified color will be recorded.
Specify the range of colors.
z Press the op buttons or turn the 7 dial
to change the range of colors to be
retained.
z Choose a negative value to limit the range
of colors. Choose a positive value to
extend the range of colors to similar colors.
z Press the m button to complete the
setting and restore the shooting screen.
You can swap one color in an image for another when recording it. You can
only swap one color.
Choose Y.
z Follow Steps 1 – 2 on p. 63 to choose Y.
Press the p button.
X The unchanged image and the Color Swap
image will alternately display.
X The default setting is to change green to
gray.
Recorded color
Using the flash may cause unexpected results in this mode.
Depending on shooting conditions, the image may become coarse, or the
colors may not come out as expected.
Shooting with Color Swap
COPY