User's Manual

40
1
3
4
5
6
7
8
9
Preliminary Notes and
Legal Information
Contents: Basic
Operations
Camera Basics
Other Shooting
Modes
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Cover
Advanced Guide
2
Auto Mode/Hybrid
Auto Mode
Still Images Movies
Customizing the Self-Timer
You can specify the delay (0 – 30 seconds) and number of shots (1 – 10).
1 Choose [$].
 Following step 1 in “Using the Self-Timer”
(=
39), choose [$] and press the
<n> button.
2 Congurethesetting.
 Press the <o><p> buttons to choose
[Delay] or [Shots].
 Press the <q><r> buttons to choose a
value, and then press the <m> button.
 Once the setting is complete, [$] is
displayed.
 Follow step 2 in “Using the Self-Timer”
(=
39) to shoot.
• For movies shot using the self-timer, [Delay] represents the delay
before recording begins, but the [Shots] setting has no effect.
• When you specify multiple shots, image brightness and white balance are
determined by the rst shot. More time is required between shots when the
ash res or when you have specied to take many shots. Shooting will stop
automatically when the memory card becomes full.
• When a delay longer than two seconds is specied, two seconds before the
shot, the lamp blinking and self-timer sound will speed up. (The lamp will
remain lit in case the ash res.)
Still Images
Deactivating the Flash
Prepare the camera for shooting without the ash as follows.
Congurethesetting.
 Press the <r> button, press the <q><r>
buttons to choose [!], and then press
the <m> button.
 Once the setting is complete, [!] is
displayed.
 To restore the original setting, repeat this
process but choose [
].
• If a ashing [ ] icon is displayed when you press the shutter button
halfway in low-light conditions, mount the camera on a tripod or take
other measures to keep it still.
COPY