Digital Camera User Guide

111

In D mode, you can choose 3 levels of flash output.

Set the mode dial to D.

Choose the level of flash output.

● After pressing the r button, immediately

turn the ÷ dial to choose the level of

output, then press the m button.

X Once set, ~ will appear on the screen.

When the camera detects the possibility that people have their eyes shut,

appears.

Choose [Blink Detection].

● Press the n button, then choose

[Blink Detection] in the 4 tab. Press the

qr buttons to choose [On].

Shoot.

X When a person with shut eyes is detected,

a frame and appear.

Adjusting the Flash Output

You can also set the flash output with the following methods. However, it

cannot be set with the

button when an external flash (sold separately) is

attached. In this case, set the flash output using methods with an asterisk *.

• After pressing the m button, press the op buttons to choose ~, then press

the qr buttons or turn the Ê dial. *

• Press the n button and choose [Flash Control] from the 4 tab. Then

choose [Flash Output] and press the qr buttons.*

• Press the r button, then the n button, or press and hold the r button

for more than 1 second, and the setting screen will appear. Choose [Flash

Out

]

, then

ress the qr buttons.

Checking for Shut Eyes

COPY