imageCLASS manual

Documents and Print Media

2-19

Output Tray

This section describes the features of the output trays.

Output Tray Type

This machine has two output trays: the output tray

on the front side of the machine and the sub-

output tray on the rear side of the machine.

Do not switch one output tray to another during

printing. This may result in paper jams.

Keep your hands and clothing away from the roller in the output

area. Even if the machine is not printing, sudden rotation of the

roller may catch your hands or clothing, resulting in personal

injury.

Output Tray

Printed paper is output to the output tray with the

printed side facing down.

●

When outputting LGL size paper, lift the paper

stopper to prevent the paper from falling off the

output tray.

The surroundings of the output tray are hot during printing or

immediately after printing. When taking out of the paper or

removing jammed paper, do not touch the surroundings of the

output tray.

Printed paper can be output only to the output tray when

performing 2-sided copying or printing.

During 2-sided copying or printing, do not touch the paper

until it is output to the output tray completely. In 2-sided

copying or printing, the paper is partially output after one side

is printed and then fed back to the machine so that the

reverse side can be printed.

–