Eos 7D Manual

Basic Operation

Before using the <5> dial, set the Quick Control Dial switch to <J>.

(1)

After pressing a button, turn the

<5> dial.

When you press a button, its function

remains selected for 6 seconds (9).

During this time, you can turn the <

dial to set the desired setting.

When the function turns off or if you

press the shutter button halfway, the

camera will be ready to shoot.

Use this dial to select or set the white

balance, drive mode, flash exposure

compensation, AF point, etc.

(2)

Turn the <5> dial only.

While looking at the viewfinder or LCD

panel, turn the <

5> dial to set the

desired setting.

Use this dial to set the exposure

compensation amount, the aperture

setting for manual exposures, etc.

Turn on (9)/off the LCD panel

illumination by pressing the <U> button.

During a bulb exposure, pressing the

shutter button completely will turn off the

LCD panel illumination.

5 Making Selections with the Quick Control Dial

U LCD Panel Illumination

You can do step (1) even when the Quick Control Dial switch is set to

<R>.

COPY