Digital Camera User Manual

3 Custom Function SettingsN

298

C.Fn-7 Assign SET button

You can assign a frequently-used function to <0>. Press <0> when the

camera is ready to shoot.

0: Normal (disabled)

1: Image quality

Press <

> to display the image-recording quality setting screen on the

LCD monitor. Select the desired image-recording quality, then press <

2: Flash exposure compensation

When you press <0>, the flash exposure compensation setting screen

will appear. Set the flash exposure compensation, then press <0>.

3: LCD monitor On/Off

Assigns the same function as the <B> button.

4: Menu display

Press <0> to display the menu screen.

5: ISO speed

The ISO speed setting screen will appear. Press the <U> key or turn

the <6> dial to change the ISO speed. You can also refer to the

viewfinder to set the ISO speed.

C.Fn-8 LCD display when power ON

0: Display on

When the power switch is turned on, the shooting settings will be

displayed (p.50).

1: Previous display status

If you pressed the <B> button and turned off the camera while the

LCD monitor was off, the shooting settings will not be displayed when

you turn on the camera again. This helps to save battery power. The

menu screens and image playback will still be displayed when used.

If you pressed the <B> button to display the shooting settings and

then turn off the camera, the shooting settings will be displayed when

you turn on the camera again.

COPY