Digital Camera User Manual

Photos

Refer to this chapter for details on shooting photos – taking photos and

playing them back, capturing photos from video and printing photos.

Taking Photos

1 Set the mode dial to .

2 Turn on the camcorder.

By default, photos are recorded on

the hard disk. You can also set the

memory card as the recording media

for photos ( 33).

3 Press halfway.

• Once the focus is automatically

adjusted, will turn green and

one or more AF frames will appear.

• When you press on the

wireless controller, the photo is

recorded after the autofocus is

activated and locked.

4 Press fully.

The ACCESS indicator will flash as

the photo is being recorded.

IMPORTANT

Observe the following precautions while

the

ACCESS indicator is on or flashing.

Failing to do so may result in permanent

data loss.

- Do not subject the camcorder to

vibrations or strong impacts.

- Do not open the memory card slot cover.

- Do not disconnect the power source or

turn off the camcorder.

- Do not change the position of the mode

dial.

NOTES

• If the subject is not suitable for

autofocus, turns yellow. Adjust the

focus manually ( 49).

• When the subject is too bright,

[Overexp.] starts flashing. In such case,

use the optional FS-H37U ND filter.

Basic Recording

PHOTO

COPY