User's Manual
Bounce Flash IIJI.llIl
III
lIll.1I111111
111II11II111111
11111111111
••
111111111111111_1.'
By pointing the flash head toward a wall or ceiling, the flash will bounce
off the surface before illuminating the subject. This can soften shadows
behind the subject for a more natural-looking shot. This is called bounce
flash.
Set the Bounce Direction
Hold down the <
PUSH>
button and turn the flash head.
If the flash coverage is set automatically, the flash coverage will be fixed
to 50mm.
The LCD panel will also display
< - - > mm.
.,
You
can also set the flash coverage manually.
4)
• If the wall or ceiling is too far away, the bounced flash might be too weak
and result
in
underexposure.
The wall or ceiling should be a plain, white color for high reflectance. If
the bounce surface is not white, a color cast may result
in
the picture.
• After you take the shot,
if
the flash exposure confirmation lamp does not
light, use a larger aperture opening and try again.
18