Instruction manual

ND Filter

Using the ND filters allows you keep the aperture within an appropriate

range when recording in bright surroundings*.

* Closing down the aperture when recording under bright conditions may cause the

picture to appear soft or out of focus. To avoid the loss of sharpness due to diffraction,

use a denser ND filter or a faster shutter speed (A 67).

Using the ND Filter

Press the ND FILTER + or - button to select the desired ND filter setting.

• Repeatedly pressing ND FILTER + button will change the ND filter setting in the following order: [ND1 2 stops]

 [ND2 4 stops]  [ND3 6 stops]  ND filter off. (The ND FILTER - button cycles through the settings in

reverse order.)

Remote Operation Using Wi-Fi Remote

After completing the necessary preparations (A 50) you can adjust the ND filter

remotely from a Wi-Fi-enabled device using the Wi-Fi Remote application.

Press [ND +] or [ND -] on the Wi-Fi Remote screen.

• The function is identical to that of the ND FILTER + and - buttons on the

camera.

• The selected ND filter setting will be displayed on the Wi-Fi Remote screen and

will be applied on the camera.

NOTES

• Depending on the scene, the color may change when turning the ND filter on/off. Setting a custom white

balance (A 76) may be effective in such case.

• If you set an assignable button to [ND -] or [ND +] (A 111), you can press the button to adjust the ND filter.

• When an optional RC-V100 Remote Controller is connected to the camera, you can use the remote

controller’s ND button in the same way as the camera’s ND FILTER + button.

Operating modes:

COPY