Specifications

Command Descriptions
2- 156
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
LIMit:COMPARE:CH<x>
(Requires TDS3LIM)
Sets or returns the template against which to compare the waveform acquired
through the specified channel. The template can be a waveform saved in any of
the reference locations REF1 through REF4, or none.
Limit Test
LIMit:COMPARE:CH<x> { NONe | REF<x> }
LIMit:COMPARE:CH<x>?
Ch<x> is a channel, where <x> is 1, 2, 3, or 4.
NONe turns off limit testing for the specified channel.
REF<x> is a reference waveform, where <x> is 1, 2, 3, or 4.
LIMIT:COMPARE:CH1 REF1
specifies REF1 as the template waveform against which to compare waveforms
acquiredonCH1.
LIMIT:COMPARE:CH2?
might return LIMIT:COMPARE:CH2 REF4, indicating that waveforms acquired on
CH2 will be compared to the limit test template waveform stored in REF4.
CURve, LIMit:TEMP Late, LIMit:TEMPLate:DESTination, LIMit:TEM-
PLate:SOUrce, WFMPre
LIMit:HARDCopy
(Requires TDS3LIM)
Sets or returns the TDS3LIM hard copy on error setting. When ON, this
command executes a screen hard copy operation when any waveform data
exceeds the limits set in the limit test, if the limit state is on. The hard copy
operation uses the port, format, and layout settings specified using the HARD-
Copy commands.
Limit Test
Group
Syntax
Arguments
Examples
Related Commands
Group