User Guide

Page
2 -12 2.2.2 Printing area
2 -13 2.3 Interface Specifications
2 -13 2.3.1 Parallel interface
2 -19 2.3.2 Serial interface
Part 3: OPERATING INSTRUCTIONS
3 - 1 1. PRINTER SETUP
3 - 1 1.1 Unpacking
3 - 3 1.2 Installation Space
3 - 4 1.3 Installation Procedure
3 - 4 1.3.1 Connecting the interface cable
3 - 4 1.3.2 Connecting the power supply
3 - 5 1.3.3 Installing BJ cartridges
3 - 8 1.3.4 Replacing ink tanks
3 - 9 1.3.5 BJ cartridge container SB-80
3 -10 1.4 Turning the Printer ON/OFF
3 -10 1.4.1 Turning the printer on
3 -10 1.4.2 Turning the printer off
3 -11 1.5 Paper Settings
3 -13 1.6 Names and Functions of Parts
3 -15 2. TRANSPORTING THE PRINTER
3 -15 2.1 Transporting the Printer
3 -16 2.2 Capping Lock/Unlock
3 -17 3. PRINTER SERVICING FUNCTIONS
3 -17 3.1 Error Indications
3 -17 3.1.1 Operator call
3 -18 3.1.2 Service call
3 -18 3.2 Warning Display
3 -19 3.3 Function Settings
3 -19 3.3.1 Maintenance settable items
3 -21 3.3.2 Custom setting
3 -23 3.4 Control Buttons
3 -23 3.4.1 Cleaning the BJ cartridges
3 -24 3.4.2 Service mode
3 -25 3.5 Self Test Print (Nozzle Check Pattern)
3 -27 3.6 EEPROM
3 -27 3.6.1 Continued use of EEPROM memory data
3 -27 3.6.2 Resetting the EEPROM
3 -28 3.6.3 EEPROM list print
3 -29 3.6.4 Destination setting
Part 4: TECHNICAL REFERENCE
4 - 1 1. OVERVIEW
4 - 1 1.1 Printer Block Diagram
4 - 2 1.2 Initial Flowchart
4 - 5 1.3 Power OFF Operation Flow
4 - 6 1.4 Print Signal Flow
4 - 7 1.5 BJ Cartridge Drive
4 - 7 1.5.1 Printing drive control
4 - 8 2. FIRMWARE
4 - 8 2.1 Interface
4 - 8 2.1.1 Nibble mode
4 - 9 2.1.2 ECP mode
III