User manual for the BJC-8200
Table Of Contents
- Using the Printer Safely
- Table of Contents
- About your guides
- Chapter 1 Printing
- Chapter 2 Using the Printer Driver
- Chapter 3 Loading Paper and Special Print Media
- Chapter 4 Troubleshooting
- Cannot install the printer driver or the scanner driver
- Printer prints meaningless characters and symbols
- Cancelling a print job
- Printing on thick paper
- Paper Jams
- Low ink alert
- Printer beeps and it does not print
- Error message appears
- Printing quality is unsatisfactory
- Adjusting colour
- Aprintout is unclear, faded
- Colour is strange
- Scanner Cartridge does not operate correctly
- When connected via USB
- Replacing the BJ Print Head
- Appendices
22
Set the media in the printer.
• For details about loading paper in the sheet feeder,
see Chapter 3.
Start the print job.
1 Click the Print button.
2 Click the Printer Settings button.
3 Click the Properties button.
4 In the Choose Print Mode box click SuperPhoto, select the Media
Type and click the OK button.
5 Click the OK button.
6 Make sure that the POWER/ERROR lamp lights green, then click
the Print button to start printing.
• When the media is ejected from the printer, printing has
completed.
7 To exit IS San Plus, click the Exit button.
6.
Reference
5.
Click!
Click!
Click!
Click!
Click!
Click!
Click!
Click!
chap-1 (E) 10/2/99 6:09 AM Page 22