User Guide

When an ink tank runs out of ink, follow this procedure to replace the ink tank.

Make sure the printer is switched on then open the front

cover.

•The BJ Print Head holder moves to the centre automatically.

Remove the empty ink tank.

•If you need to replace more than one empty ink

tank, remove and replace each tank one by one to

prevent installing an ink tank in the incorrect slot.

•To prevent interfering with the flow of ink from a

tank, never touch the ink port of an ink tank.

•Do not remove the BJ Print Head.

•Discard empty ink tanks according to the local laws

and regulations regarding disposal of consumables.

Remove the new ink tank from its package. Pull the

orange tape up and against the perforations to open the

packing film.

•Remove the film carefully so you do not remove

the label from the ink tank. If the label is removed,

the ink tank cannot be used.

Grip the bottom of the ink tank as shown in the

illustration and twist off the orange protective cap in the

direction of the arrow.

•To avoid spilling ink, never press in on the sides of

an ink tank.

•Discard the protective cap and never attempt to

reattach it to an ink tank according to the

environmental laws of your country.

Hold the new ink tank at a slight angle, align it with the

correct slot, and then insert it. Make sure you insert the

ink in the correct slot.

•Check the color of the ink tank with the label on the

printer that shows you the correct slot for each ink tank

to ensure that the ink tank is inserted into the correct

slot.

To lock the ink tank in place, press down on the top of

the ink tank. Press down until you hear the tank lock in

place.

Close the front cover.

•The print head holder returns to the home position and print head

cleaning starts automatically. The POWER/ERROR lamp flashes

during print head cleaning. When print head cleaning is finished

and the POWER/ERROR lamp remains on, you can resume normal

operation.

Memo

Caution

Memo

Caution