User manual for the BJC-55
45Paper Handling
Paper and Other Print Media
■ Back Print Film
• Canon’s Back Print Film is recommended for use with this printer. Before you
use this media, read the instructions provided with the package.
• When you select Back Print Film for the Media Type, the document image is
reversed or “mirrored” when it is printed so it will display correctly when placed
on a backlight device.
• Do not attempt to print on back print film in a location where humidity is high.
• Always print on the non-reflecting, rough side of back print film.
• Set a sheet of back print film in the printer, with the print side facing up.
• Always feed back print film manually, one sheet at a time.
• Do not stack the sheets after printing. Allow at least 15 minutes for the ink on
printed sheets to dry, and do not touch the printed surfaces.
■ Glossy Photo Cards
• Canon’s Glossy Photo Cards are ideal for printing photographic images. This is a
special sized sheet made of the same stock as Glossy Photo Paper.
• The cards have borders slightly larger than the print area. Separate the borders
from the cards at the perforations only after printing has been completed. You
can print 4 × 6 inch borderless photos.
• Before you use this media, read the instructions provided with the package.
• Allow about two minutes for ink to dry on Glossy Photo Cards.
BJC-55.book Page 45 Tuesday, August 15, 2000 2:08 AM