Service manual

BJC-4300

Part 1: Safety and Precautions

2.1 Handling BJ Cartridges

2.1.1 Unpacking the BJ cartridge

Do not unpack the BJ cartridge until it is ready to be used.

Before installing the BJ

cartridge in the printer, remove the cap protecting the nozzles and gently peel off the

protective tape.

Color BJ Cartridge

Black BJ Cartridae

Tape

Photo BJ Cartridge

Figure 1-6 Removing the BJ Cartridge Protector

2.1.2 Preventing clogged nozzles

Never touch or wipe the nozzles

with

tissue paper, etc. to prevent them from

CIogging.

To prevent dirt or dried ink from clogging the nozzles

however.install

the

cartridge

immediately in

the

printer or in the

cartridge

container after removing the cap and

peeling off the protective tape.

Do not attempt to reuse the cap or tape as doing so can cause print defects.

Do not store the color BJ cartridge with the ink cartridge removed.

BJ cartridges cannot be disassembled, reassembled, or washed.

Clogged nozzles can cause white streaks across printed areas

If this

NOTE

problem persists even after the ink cartridge is cleaned by the printer,

replace the BJ cartridge.

Black BJ Cartridge

Color BJ Cartridge

Photo BJ Cartridge

Figure 1-7 BJ Cartridge

1-5