Service manual

Part 5: Maintenance BJC-4300
6.Waste Ink Full
Error
7.Temperature
Sensor Error _
8. Printing Position
Correction Error
<CZtUSe> The waste ink absorbers’ estimated waste ink amount
has reached 100%
<Suspected Parts> Waste ink absorbers, logic board
<Measures> 1 .Reset the EEPROM and replace the waste ink
absorbers.
2.Replace logic board.
<CaLBe> Thermistor is abnormal.
<Suspected Parts> Thermistor
<Measures> Replace logic board.
<Cause> The printing position correction value cannot be
detected.
<Suspected Parts> Carriage motor, logic board, home
position sensor
<Measures> See countermeasures for home position sensor
error.
5-20