User Guide

Part 5: Maintenance
BJC-2000
5-14
<Cause>
The waste ink absorbers’ estimated waste ink amount
has reached 100%.
<Suspected Parts> Waste ink absorbers, logic board
<Measures> 1.Reset the EEPROM and replace the bottom
cover unit.
2.Replace logic board.
<Cause> Thermistor is abnormal.
<Suspected Parts> Thermistor
<Measures> Replace logic board.
<Cause> The printing position correction value cannot be
detected.
<Suspected Parts> Carriage motor, logic board, home
position sensor
<Measures> See countermeasures for home position sensor
error.
4.Waste Ink Full
Error
6.Carriage
Control Error
5.Temperature
Sensor Error