User's Manual

J4 (Digital Camera Connector)
J5 (IrDA Board)
J301 (Memory Card Board)
41 CF_RESETX
CF reset
IN
42 CF_IORDY CF ready input - output IN/OUT
43 CF_INPACKX Not used IN
44 VCC(CF_REGX)
CF register select
OUT
45 CF_DASPX Not used -
46 CF_PDIAGX Not used -
47 CF_D8
CF 16 bit data bus
IN/OUT
48 CF_D9 CF 16 bit data bus IN/OUT
49 CF_D10 CF 16 bit data bus IN/OUT
50 GND
CF logic ground
-
51 PEG(FGND) Not used -
52 PEG(FGND) Not used -
No. Signal name Function Input / Output
1 DSC_VBUS PictBridge VBUS power supply OUT
2 DSC D- Camera Direct D- signal IN/OUT
3 DSC D+ Camera Direct D+ signal IN/OUT
4 DSC_SGND Ground -
5 to 8 DSC_FGND Ground -
No. Signal name Function Input / Output
1 Ir_3.3V Logic power supply OUT
2 Ir_RXD IrDA reception signal IN
3 Ir_TXD IrDA reception signal
OUT
4 Ir_GND Ground -
5 Ir_FGND Ground -
No. Signal name Function Input / Output
1 Ir_3.3V Logic power supply IN
2 Ir_RXD IrDA reception signal OUT
3 Ir_TXD IrDA reception signal
IN
4 Ir_GND Ground -
5 Ir_FGND Ground -
To the table of contents To the top
<Part 3: 2. CONNECTOR LOCATION AND PIN LAYOUT; 2-2. Card Slot Board>
3-11