User's Manual

CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS
7–18
COPYRIGHT © 1998 CANON INC. CANON NP7160/NP7161 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
[4]
[3]
[5]
[2]
[1]
Figure 7-322
[4]
[2]
[1]
[3]
Figure 7-323
E. Counter Assembly
1. Removing the Counter Assembly
1) Remove the control panel.
2) Remove the two mounting screws [1], and
remove the magnet [2].
3) Disconnect the two connectors [3], and
remove the two mounting screws [4];
then, detach the counter assembly [5].
Caution:
When removing the magnet, mark its
position and mount it with reference
to the markings.
F. Main Motor Assembly
1. Removing the Main Motor
Assembly
1) Remove the rear cover and the rear upper
cover.
2) Disconnect the connector [1], and remove
the four mounting screws [2].
3) Remove the two locking supports [3], and
detach the main motor assembly [4].