User's Manual

Checking the Counter and Controller Version
5-2
5
Checking Job and Device Status
Checking the Counter and Controller Version
You can check the copy and print page counts, and the print and scan page counts
that are performed by users who log on to MEAP applications using a login service.
You can also check the version of controller.
1 Press (Counter Check) on the control panel.
The various counts are shown on the touch panel display.
2 Check the Send/Fax counter, MEAP counter, or controller
version.
● To check the Send/Fax counter:
❑
Press [Send/Fax Cntr Check].
[Send/Fax Cntr Check] appears if the optional Universal Send Kit is activated,
and the optional Super G3 FAX Board is installed.
[Send Counter Check] appears if the optional Universal Send Kit is activated,
but the optional Super G3 FAX Board is not installed.
[Fax Counter Check] appears if the optional Super G3 FAX Board is installed,
but the optional Universal Send Kit is not activated.
❑ Press [Done].
● To check the MEAP counter:
❑
Press [MEAP Counter].
❑ Press the Application Name drop-down list ➞ select the desired application.
To check the version information of an application, the MEAP Contents version
information, etc., press [Version Information].
MNO
WXYZ
Start
Stop
Counter
Check
3
6
9