Owner's Manual

Initial
Preparations
Charge the battery pack.
CB-2LC:
Flip
out the plug
(1) and
plug
the charger into a power outlet
(2).
CB-2LCE:
Plug
the power cord into the
charger, then plug
the other end into a
power
outlet.
The charging lamp
turns orange, and
charging begins.
When charging is finished, the lamp
turns
green. Remove the battery pack.
For
details
on charging time and the
number
of
shots
or
recording time
available
with a
fully
charged battery
pack, refer to "Specifications"
in
the
electronic manual.
'----='
Inserting
th~
Batt~rYhck
and
Memory
Car~
J
(2)
( 1)
Open
the cover.
Slide
the switch ( 1) and open the cover
(2).
Insert the battery pack.
Holding
the battery pack with the
terminals
(1) facing as shown, press the
battery
lock
(2)
in
the direction
of
the
arrow and insert the battery pack
until the
lock clicks
shut.
If
you insert the battery pack facing the
wrong way, it cannot be locked
into the
correct position.
Always
confirm that the
battery
pack is facing the right way and
locks when inserted.
To
remove the battery pack, press the
battery lock
in
the direction
of
the arrow.
15