Owner's Manual

k Shooting Movies
186
5
Focus and shoot the movie.
The procedure is the same as steps 3
and 4 for “Autoexposure Shooting”
(p.182).
ISO Speed During Manual Exposure Shooting
With [Auto], the ISO speed will be set automatically within ISO 100 -
ISO 6400.
You can set the ISO speed manually within ISO 100 - ISO 6400 in
whole-stop increments. Under [54: Custom Functions (C.Fn)], if
[2: ISO expansion] is set to [1: On], the manual setting range will
expand so you can also select H (equivalent to ISO 12800).
Under [54: Custom Functions (C.Fn)], if [3: Highlight tone
priority] is set to [1: Enable], the ISO speed will be ISO 200 - ISO
6400.
Since shooting a movie at ISO 12800 may result in much noise, it is
designated as an expanded ISO speed (displayed as “H”).
Under [54: Custom Functions (C.Fn)], if [2: ISO expansion] is set to
[1: On] and you switch from still photo shooting to movie shooting, the
manual setting range’s maximum will be H (equivalent to ISO 12800).
Even if you switch back to s ill photo shooting, the ISO speed will not
revert to the original setting.
Exposure compensation cannot be set.
Changing he shutter speed or aperture during movie shooting is not
recommended since the changes in the exposure will be recorded.
If you change the shutter speed while shoo ing under fluorescent or LED
lighting, image flicker may be recorded.
When ISO Auto is set, you can press the <A> button to lock the ISO
speed.
If you press the <A> button and recompose he shot, you can see the
exposure level difference on the exposure level indicator (p.187)
compared to when the <A> button was pressed.
By pressing the <B> button, you can display the histogram.
When shooting a movie of a moving subject, a shutter speed of 1/30 sec.
to 1/125 sec. is recommended. The faster the shutter speed, he less
smooth the subject’s movement will look.