User's Manual
1
2
3
4
5
6
7
8
9
10
11
Cover
Preliminary Notes
and Legal Information
Contents: Basic
Operations
Advanced Guide
Camera Basics
Using GPS
Function
Auto Mode/
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
79
Still Images
High-Speed Continuous Shooting
(High-speed Burst HQ)
You can shoot a series of shots in rapid succession by holding the shutter
button all the way down. For details on the continuous shooting speed, see
“Continuous Shooting Speed” (=
192).
HQ: High Quality
1 Choose [ ].
Followsteps1–2in“SpecicScenes”
(=
71) and choose [ ].
2 Shoot.
Hold the shutter button all the way down
to shoot continuously.
Shooting stops when you release the
shutter button or reach the maximum
number of shots, after which [Busy] is
displayed and the shots are shown in the
order you took them.
Each set of images shot continuously is
managed as a single group, and only the
rstimageinthatgroupwillbedisplayed
(=
70).
• Focus,imagebrightness,andcoloraredeterminedbytherstshot.
• The screen is blank while you are shooting.
• There may be a delay after continuous shooting before you can shoot again.
Note that some types of memory cards may delay your next shot even longer.
SD Speed Class 6 or higher memory cards are recommended.
• Shooting may slow down depending on shooting conditions, camera settings,
and the zoom position.
4 Join the subjects in the
shooting area and look at the
camera.
After the camera detects a new face, the
lamp blinking and self-timer sound will
speedup.(Whentheashres,thelamp
will remain lit.) About two seconds later,
the camera will shoot.
To cancel shooting after you have
triggered the self-timer, press the
<n> button.
• Even if your face is not detected after you join the others in the shooting area,
the camera will shoot about 15 seconds later.
• To change the number of shots, press the <o><p> buttons after choosing
[
] in step 1. [Blink Detection] (=
66)isonlyavailableforthenalshot.
COPY